A combination flange is used when the minimum leg lengths for either the standard elbow or the standard flange cannot be met.
Unit of Measure

Type

N/A Panel Flange Flatwise Up

Construction Type

N/A Single

Application

N/A Indoor

Material

N/A Painted Copper

Series

N/A HPB –GULF – IEC

Mounting Type

N/A Edge Installation

Configuration

N/A TPNE

Industry Standards

N/A IEC

Conductor Material

N/A Copper

Number of Poles

N/A 5

Busbar Rating

N/A 1250 A

Degree of Protection

N/A IP55 (up to IP67 upon request)

Conductor

N/A 60

Rated Operational Voltage

N/A 1000 V

Rated Insulation Voltage

N/A 1000 V

Short Circuit Rating [1 sec]

N/A 65 kA rms

Short Circuit Peak Value

N/A 143 kA

Phase Conductor - Cross Sectional Area

N/A 360 mm²

Neutral Conductor - Cross Sectional Area

N/A 360 mm²

Isolated Earth Conductor - 100% Earth Cross Sectional Area

N/A 360 mm²

Isolated Earth Conductor - 50% Earth Cross Sectional Area

N/A 180 mm²

Housing Earth Path - Cross Sectional Area

N/A 1169 mm²

Resistance at 20°C

N/A 0.046 mΩ/m

Resistance at 80°C

N/A 0.072 mΩ/m

Reactance at 50Hz

N/A 0.040 mΩ/m

Reactance at 60Hz

N/A 0.035 mΩ/m

Impedance at 80°C

N/A 0.080 mΩ/m

Busbar Width

N/A 148 mm

Busbar Height

N/A 118 mm

X Length [Min]

N/A 243 mm

Y Length [Min]

N/A 110 mm

X Length [Max]

N/A 350 mm

Y Length [Max]

N/A 480 mm