E+I Engineering’s splice is a compression joint design utilising a specially designed Belleville washer to distribute the pressure evenly over the splice. The splice is supplied in specific sizes depending on the rating of busduct required.
Unit of Measure

Type

N/A Joint Packs

Construction Type

N/A Single

Application

N/A Indoor

Series

N/A HPB UL

Configuration

N/A TPNE

Industry Standards

N/A UL

Certification Marks

N/A UL857

Material

N/A Painted Aluminium

Busbar Rating

N/A 800 A

Conductor

N/A 60

Rated Operational Voltage

N/A 1000 V

Rated Insulation Voltage

N/A 1000 V

Short Circuit Rating [6 Cycle]

N/A 75 kA

Phase Conductor - Cross Sectional Area

N/A 360 mm²

Neutral Conductor - Cross Sectional Area

N/A 360 mm²

Isolated Earth Conductor - 100% Earth Cross Sectional Area

N/A 360 mm²

Isolated Earth Conductor - 50% Earth Cross Sectional Area

N/A 180 mm²

Housing Ground Path Cross Sectional Area

N/A 1880 mm²

Resistance at 68°F

N/A 2.092 mΩ/100·ft

Busbar Width

N/A 5.83 in148 mm

Busbar Height

N/A 4.65 in118 mm