E+I Engineering’s splice is a compression joint design utilising a specially designed Belleville washer to distribute the pressure evenly over the splice. The splice is supplied in specific sizes depending on the rating of busduct required.
Unit of Measure

Type

N/A Joint Packs

Construction Type

N/A Single

Application

N/A Indoor

Series

N/A HPB UL

Configuration

N/A TP

Industry Standards

N/A UL

Certification Marks

N/A UL857

Material

N/A Painted Aluminium

Busbar Rating

N/A 1200 A

Conductor

N/A 100

Rated Operational Voltage

N/A 1000 V

Rated Insulation Voltage

N/A 1000 V

Short Circuit Rating [6 Cycle]

N/A 100 kA

Phase Conductor - Cross Sectional Area

N/A 600 mm²

Neutral Conductor - Cross Sectional Area

N/A 600 mm²

Isolated Earth Conductor - 100% Earth Cross Sectional Area

N/A 600 mm²

Isolated Earth Conductor - 50% Earth Cross Sectional Area

N/A 300 mm²

Housing Ground Path Cross Sectional Area

N/A 2120 mm²

Resistance at 68°F

N/A 1.397 mΩ/100·ft

Busbar Width

N/A 5.83 in148 mm

Busbar Height

N/A 6.22 in158 mm